February 23, 2012

New Arduino Capacitance Meter

I've always wanted to make a capacitance meter. So I searched the internet for some codes and schematics and all of them were too hard or had lots of bugs. So I decided to make one myself with an LCD. I found this tutorial. I copied the code and edited it so it displays the data to an LCD. I works on microFarads, but not nanoFarads (I do not know the reason). But still, making capacitor banks and measuring the capacitance is fun...
The schematic


EDIT: I finally had the time to set up a repository for this code. (HERE)
Any contributions are welcome.

I am truly sorry for everybody who waited or couldn't achieve something because of the absence of the code.

at
Labels:

26 comments:

  1. ThijssjihTJune 16, 2014 at 10:09 PM

    The schematic link is dead. :(

    ReplyDelete
    Replies
    1. jangdanJuly 2, 2014 at 6:08 PM

      I can send the schematic to you personally, if you promise not to redistribute it. If you promise, e-mail, please?

      Delete
    2. MartinAugust 22, 2014 at 3:21 AM

      Hello, my email is u-je-truck@email.cz, can you send me a code and schematic please ? thanks very much :)

      Delete
    3. edertorresOctober 1, 2014 at 12:44 PM

      hello, can you send me the code please?

      Delete
    4. edertorresOctober 1, 2014 at 12:45 PM

      my email is ederjair_94@hotmail.com thanks

      Delete
    5. UnknownNovember 19, 2014 at 5:36 PM

      Hello,

      Can you send me the code and schematic please ?
      my email id is :yogeshbabu2008@gmail.com

      Thanks in Advance

      Delete
    6. UnknownJanuary 29, 2015 at 4:32 AM

      This comment has been removed by the author.

      Delete
    7. dweinigerFebruary 24, 2015 at 5:32 PM

      Hi, I would love to make this cap meter, I will not distribute, please email to dweiniger@gmail.com
      thanks for your great effort!

      Delete
    8. UnknownMarch 4, 2015 at 3:25 AM

      Hello there.. I really need to make this cap meter for my assignment. May I ask for the code and the schematic? Please email me at mieyaya.moha318@gmail.com. Hope to have good reply from u.. Thank u in advance.. Really appreciate it :)

      Delete
    9. CarlossomtvApril 9, 2015 at 10:11 PM

      Hello, could send me code and schema?
      I am technician in electronics and I use to work in my workshop.
      I will not distribute
      carlossomtv@ig.com.br

      Delete
    10. ogrimMay 9, 2015 at 9:12 PM

      Hi! I would love to make this project to test salvaged capacitors from scrapped electronics. I'd love to have the schematics and the code if you feel like sharing it. Thanks in advance! Email: karl.blume{{at}}live.se

      Delete
    11. jangdanMay 19, 2015 at 9:30 PM

      Hello, you reading this comment.
      The code is available in the following GitHub repository: https://github.com/electricmango/ncm
      I'll have to dig through my files a little more for the schematic, and I shall keep this comment section updated just in case.

      You don't have to reveal any personal information here anymore.

      Delete
    12. UnknownMarch 21, 2018 at 7:14 AM

      Hi, great work, congratulations. I were looking for a project like yours for a while, luckily today I found yours. I downloaded the code you provided in github. I would like to get the schematics, please. I do promise I dont want it for commercial intends, just for using it my own, and never redistribute it.
      My email is: turquazman@gmail.com
      thank you

      Delete
  2. UnknownNovember 6, 2014 at 6:07 PM

    hi there :) Nice Cap-meter! I'd like to make one, could you send me the schematics and the code? I promise not to distribute it anywhere. Cheers Arni Geir -> smaug@simnet.is

    ReplyDelete
  3. AnonymousNovember 19, 2014 at 10:57 PM

    This is nice cap meter can u please give me code and schematic so can i build and used it because need it i promise to you that i not distribute it . my email id is :- rohit_rohit2020@yahoo.com (please reply)

    Thanks

    ReplyDelete
  4. UnknownDecember 1, 2014 at 12:10 AM

    I am also requesting the code and schematic. Possibly, I can offer an opinion on why ranges in the pF can not be read. I would not distribute your work.
    Thanks for sharing a cool project!
    Email: lwallace@alumni.fit.edu

    ReplyDelete
  5. AnonymousDecember 30, 2014 at 11:22 PM

    Nice work!
    May I have the schematic and code for building one for myself?
    Mail is DL1AKP@web.de
    Thanks, Andy

    ReplyDelete
  6. AnonymousFebruary 21, 2015 at 1:44 AM

    Really nice
    I want the code, to make one, the link is dead. could you please send it to my adress?
    my mail is pbdgs66@gmail.com
    Thanks

    ReplyDelete
  7. r00fMarch 1, 2015 at 4:17 AM

    Hello!
    Can you send me the code and schematic please?
    r00f at ebanat.com
    I will not distribute!

    Thanks in advance

    ReplyDelete
  8. CarlossomtvApril 9, 2015 at 10:09 PM

    Hello, could send me code and schema?
    I am technician in electronics and I use to work in my workshop.
    I will not distribute
    carlossomtv@ig.com.br

    ReplyDelete
  9. UnknownMay 2, 2015 at 7:33 PM

    hi there :) Nice Cap-meter! I'd like to make one, could you send me the schematics and the code? I promise not to distribute it anywhere. Cheers Arni Geir -> prite.manao195@gmail.com

    ReplyDelete
  10. UnknownMay 7, 2015 at 5:33 AM

    Code and Schematic please??!! brian.sowders@gmail.com

    ReplyDelete
  11. UnknownJune 16, 2015 at 8:13 PM

    This comment has been removed by the author.

    ReplyDelete
    Replies
    1. jangdanJune 16, 2015 at 11:21 PM

      Hey! You can find a lot of information here: http://www.arduino.cc/en/Tutorial/CapacitanceMeter
      I heavily used this page as a reference.

      Connect as this schematic (from that page I mentioned above): http://www.arduino.cc/en/uploads/Tutorial/CapacitanceMeterSchem.png
      Now you just want to connect an LCD to the Arduino.

      Source code is available on GitHub, link in the post.

      Hope this helps!

      Delete
  12. AnonymousJuly 5, 2015 at 7:49 PM

    Can you please send me the schematics and code (with LCD) on hen.hail33@gmail.com. Good work btw ;) Thank you!!

    ReplyDelete
  13. UnknownDecember 20, 2016 at 11:33 AM

    Code and Schematic please??!! afad.mz@gmail.com

    ReplyDelete

Subscribe to: Post Comments (Atom)